| | | |
2010 Rates (Low voltage Halogen or LED Lighting Systems) | Service & Maint. | One Time Tune-Up |
| 1-2 Transformers - up to 19 Light Fixture System | NA | $268 |
| 2-3 Transformers - 20-35 Light Fixtures | $489 Half Year Plan $784 Full Year Plan | $415 |
| 2-3 Transformers - 36-51 Light Fixtures | $623 Half Year Plan $984 Full Year Plan | $650 |
| 3-4 Transformers - 52-77 Light Fixtures | $1071 Half Year Plan $1356 Full Year Plan | $874 |
| 4-8 Transformers – 78-100 Light Fixtures | $1103 Half Year Plan $1705 Full Year Plan | $1010 |
| 5-12 Transformers – 100-200 Light Fixtures | $1905 Half Year Plan $2908 Full Year Plan | $1805 |
| | | |
Service Plans -VS- Tune Up | Yearly Plan | One Time Complete Tune-Up |
| A fully trained Dupre Group Team Member to visit the property of the installed system to perform needed lamp (bulb) replacements, adjustments, preventative maintenance | Yes | Yes |
| Automatic maintenance performed at minimum six (6) times a year | Yes | NA |
| On call priority troubleshooting / repair service with response time of three (3) business days or better | Yes | NA |
On call lamp (bulb) replacements performed within five (5) business days or better | Yes | NA |
| | | |
| What is Included | Service Plan | One Time Tune-Up |
Making sure all installed lamps (bulbs) are in proper working order - checking that they are receiving proper voltage and replacing them if burned our or illuminating poorly | Yes | Yes |
| If needed, lighting system troubleshooting provided during a property visit | Yes | Yes |
Cleaning lenses, performing landscape trimming and pruning around fixtures as needed ensuring maximum light output to target | Yes | Yes |
Making positional adjustments of fixtures to ensure original lighting design is being properly represented | Yes | Yes |
Resetting or adjusting timers or home automation system controllers | Yes | Yes |
Verifying transformer operation matches original settings and make adjustments if not. | Yes | Yes |
Repairing cut wires with a water resistant splice - copper crimp or shrink tube. Note: If location of cut is NOT readily found and / or not accessible, then a complete new wire run would be needed and additional per foot and hourly charges will apply | Yes | Yes |
| | | |
Other Services | Service Plan | One Time Tune-Up / Single Repair Only Visit |
| Repair effort beyond what is covered in bundled services described above, or under a single repair visit ( 1hr min. charge ) | $45/Hr | $90/Hr |
Install new replacement parts / components (e.g. lenses, sockets, wiring, timers, etc. --all other than lamps / bulbs) not still covered by manufacturer warranty | $45/Hr Plus Cost of Parts | $90/Hr Plus Cost of Parts |
Process under manufacture warranty component replacements (re-install NOT included) | $50 Flat Fee | $100 Flat Fee |
Reinstalling / reconfiguring / system training of computer based home automation system (X10 or INSTEON) | $100 Flat Fee | $300 Flat Fee |
| Top Quality 4,000-10,000 Hr Replacement Low Voltage Halogen Lamps (bulbs) | $9.10 - $25.20 ea | $9.10 - $25.20 ea |
11//24/2009
Only the
highest quality, marine environment proven fixtures and components are incorporated
into our designs
