| | | |
2010 Rates ( Low Voltage Lighting Systems) | Service Plan | One Time Tune-Up |
| 1-2 Transformers - up to 19 Light Fixture System | NA | $268 |
| 2-3 Transformers - 20-35 Light Fixtures | $589 / Half Year $884 / Full Year | $415 |
| 2-3 Transformers - 36-51 Light Fixtures | $723 / Half Year $1084 / Full Year | $650 |
| 3-4 Transformers - 52-77 Light Fixtures | $971 / Half Year $1456 / Full Year | $874 |
| 4-8 Transformers – 78-120 Light Fixtures | $1203 / Half Year $1805 / Full Year | $1356 |
| 5-12 Transformers – 121-200 Light Fixtures | $2005 / Half Year $3008 / Full Year | $$1805 |
| | | |
Service Plans -VS- Tune Up | Yearly Plan | One Time Complete Tune-Up |
| A fully trained Dupre Group Team Member to visit the property of the installed system to perform needed lamp (bulb) replacements, adjustments, preventative maintenance | Yes | Yes |
| Automatic maintenance performed at minimum six (6) times a year | Yes | NA |
| On call priority troubleshooting / repair service with response time of three (3) business days or better | Yes | NA |
On call lamp (bulb) replacements performed within five (5) business days or better | Yes | NA |
| | | |
| What is Included | Service Plan | One Time Tune-Up |
Making sure all installed lamps (bulbs) are in proper working order - checking that they are receiving proper voltage and replacing them if burned our or illuminating poorly | Yes | Yes |
| If needed, lighting system troubleshooting provided during a property visit | Yes | Yes |
Cleaning lenses, performing landscape trimming and pruning around fixtures as needed ensuring maximum light output to target | Yes | Yes |
Making positional adjustments of fixtures to ensure original lighting design is being properly represented | Yes | Yes |
Resetting or adjusting timers or home automation system controllers | Yes | Yes |
Verifying transformer operation matches original settings and make adjustments if not. | Yes | Yes |
Repairing cut wires with a water resistant splice - copper crimp or shrink tube. Note: If location of cut is NOT readily found and / or not accessible, then a complete new wire run would be needed and additional per foot and hourly charges will apply | Yes | Yes |
| | | |
Other Services | Service Plan | One Time Tune-Up |
| Repair Existing ( beyond what is included in bundled services -see plan descrip. above ) | $45/Hr | $90/Hr |
Install new replacement parts / components (e.g. lenses, sockets, wiring, timers, etc. --all other than lamps / bulbs) | $20/Hr | $90/Hr |
Process under manufacture warranty component replacements | $50 Flat Fee | $100 Flat Fee |
Reinstalling / reconfiguring / system training of computer based home automation system (X10 or INSTEON) | $100 Flat Fee | $300 Flat Fee |
| Top Quality 4,000-10,000 Hr Replacement Low Voltage Lamps (bulbs) | $9.10 - $25.20 ea | $9.10 - $25.20 ea |
10/05/2009
Only the very latest,
longest lasting, most
power efficient,
environment proven, and
business effective
available in the market
(e.g. see
